In nearly all cases, most individuals spend quite a bit of money purchasing their lift truck. Hence, it is very essential to take good care of it so as to protect your investment well into the long run. It is a good idea to know the procedures which are carried out during the maintenance and care of this piece of machinery.
By starting up the forklift and listening closely how it works is among the best ways to tell how good the engine is running. Like for example, if there are any knocks or misses, the equipment is defective and this must raise some concerns. Moreover listen carefully for any squealing noise that come from the belts since these sounds will provide you with a wealth of information.
Several of the main parts requiring attention during maintenance comprise the safety warning devices, gauges, horn, the lights and the overhead guard. Any faulty parts or burnt out light bulbs should be replaced as soon as they are noticed. It is also vital to inspect the wiring.
When the above components have been checked thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Every cell of the battery must be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be replaced regularly. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
When the oil change has been carried out and new filters have been fitted, visually inspect the drive axle from beneath the equipment. Be certain to grease the axle if there is any grease fitting. Inspect the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Next, inspect every other component of the machine like the wheels. If any type of fault or problem is detected, be certain to deal with it immediately in order to make certain the machine is running at its safest and optimum levels.